中文
- 中文
- English
- français
- Deutsch
- русский
- italiano
- español
- português
- 日本語
- 한국의

MXN MEMS 光开关

Features

Proven MEMS durability and reliability
Compact Form Factor
TTL UART interface
Qualified to Telcordia GR-1073-CORE and RoHS

Applications

Optical path selection
AsAutomatic optical distribution rack

现在查询

类别

热门产品

产品详细信息

M x N MEMS Optical Switch OXC

M x N MEMS Optical switch is used in optical cross-connect, OXC application. It’s also called Matric Optical Switch. It allows channel selections between M input fibers and N output fibers.

FIBERWDM’s MEMS Modular Single-Mode OXC is based on industry proven, long-life, reliable MEMS 1xN optical switch components. Each MxN OXC consists of M 1xn OSW and N 1xm OSW.

Product Configurations

Note: M*N requires less than 1024.

Optical Specifications

PARAMETER		VALUE	UNIT	NOTE
Wavelength		1290~1330 1525~1568 1600-1650	nm	Or customer specify
Test Wavelength		1310/1550/1625 or 1650	nm
MxN		8x8/8x16/16x16/16x32		M*N≤1024
Insertion Loss	4x4	≤1.4 @S	dB	@CWL,23°C Without Connectors @S: 13 or 15 or 16 @D: 13&15 or 15&16 (if with connectors or support @D, IL increased by 0.4dB)
	4x8	≤1.6 @S
	8x8	≤1.8 @S
	8x16	≤1.9 @S
	12x12	≤2.0 @S
	16x16	≤2.0 @S
	16x32	≤2.3 @S
	24x24	≤2.5 @S
Return Loss		≥45	dB	Or customer specify
Repeatability		≤0.1	dB
Crosstalk		≥50	dB	Or customer specify
Polarization Dependence Loss		≤0.4	dB
Wavelength Dependence Loss		≤0.6	dB	@CWL±20nm, 23°C
Temperature Dependence Loss		≤0.8	dB
Switch Time		≤15 @16x16 ≤25 @24x24	ms	A set of configuration link Eg: M1-N12
Durability		≥1x10⁹	cycle
Maximum optical Power		≤500	mW

Electrical and Mechanical Specifications

PARAMETER	VALUE	UNIT	NOTE
Switch Mode	Non-latching
Control Voltage	12	V	Module
Dimension	150×150×20 @8x8 200x180x18 @16x16 200x180x18 @8x24 312x180x30 @24x24	mm	Module

Environmental conditions

PARAMETER	VALUE	UNIT	NOTE
Operation Temperature	-5~65	°C
Storage Temperature	-40~85	°C
Operation Humidity	5~95	%RH
Storage Humidity	5~95	%RH

Pigtail and connector type/length

PARAMETER	VALUE	UNIT	NOTE
Fiber Type	G657A2 or G657B3 250um bare fiber
Fiber Pigtail(All Ports)	250um fiber or 900um loose tube
Fiber Length(All Ports)	1.00±0.05	m	Or customer specify
Optical Connector(All port)	None		Or customer specify

MECHANICAL DRAWINGS

8x8 OXC MEMS Optical Swtich

16x16 OXC MEMS Optical Swtich

24x 24 OXC MEMS Optical Swtich

相关产品

MEMS VOA 可调衰减器

Product Features Low insertion loss Low polarization dependent Compact size Available in both normally open and normally closed states Excellent reliability Product Application Power Management Receiver protective Channel Balance Instrumentation

1XN MEMS 光开关

Features Proven MEMS durability and reliability Compact Form Factor Fast switching time Qualified to Telcordia GR-1073-CORE and RoHS Applications Opticalsignal switching androuting Optical network protection and restoration Optical path monitoring (Workingwith OTDR or OCM) Instrumentation resource sharing

XFP 10G DWDM 80km Transceiver

Features: Support multi protocol from 9.95Gb/s to 11.3Gb/s Hot pluggable 30 pin connector Compliant with XFP MSA Transmission distance of 80km over single mode fiber DWDM EML laser transmitter APD Receiver 100GHz ITU Grid, C Band Duplex LC connector 2-wire interface for management and diagnostic monitor XFI electrical interface with AC coupling Power supply voltages: +3.3V, +5V Temperature range 0°C to 70°C Power dissipation: <3.5W RoHS Compliant Part Applications: 10GBASE-ER/EW Ethernet SONET OC-192 /SDH 80km 10G FC DWDM Networks Transceiver Types:

8口网络分光器

低插损，不影响数据流量包。无需电源，无需IP址址，无需MAC地址，100%无源产品，性能安全可靠安装和操作简单，非专业人士即可独立完成。 8个OTAP端口，支持4路主链路串接，数据流量复制；可替代4个交换机镜象端口。成本低，集成度高，最多可集成32个OTAP端口，支持16路主链路中接，数据流量复制

网络性能管理-NPM

基于SNMP和日志的传统网络管理系统主要通过监视主机和网络设备，实现对故障、变更、流量等数据的监控，以及对拓扑和资源使用的管理。

SFP+ 16G C17-C61 DWDM 20KM DDM Optical Transceiver

Product Features Supports up to 14.025Gbps bit rates Hot-pluggable SFP+ footprint 100GHz ITU, C Band DWDM Cooled EML laser and PIN photodiode, Up to 20km for SMF transmission Compliant with SFP+ MSA and SFF-8472 with duplex LC receptacle Compatible with RoHS Single +3.3V power supply Real Time Digital Diagnostic Monitoring Operating case temperature: Standard: 0 to +70°C Applications 4.25/8.5/14.025G Fibre channel Other Optical links

2X2B磁光开关

Features Solid-state high speed High Stability, High Reliability Epoxy-free on Optical Path Fail-safe latching Applications Aerospace equipment Configurable Add/Drop System monitoring Sensing system

100G QSFP28 LR4 1310nm 10km LC Optical Transceiver

100G QSFP28 LR4 optical transceiver module, support 100Gb/s and up to 10 km transmission on SM fiber, it works in high-speed IDC connection solutions, and so on. Features 4 lanes MUX/DEMUX design Integrated LAN WDM TOSA / ROSA for up to 10 km reach over SMF Support 100GBASE-ER4 for line rate of 103.125Gbps and OTU4 for line rate of 111.81Gbps Aggregate bandwidth of >100Gbps Duplex LC connectors Compliant with IEEE 802.3-2012 Clause 88 standard IEEE 802.3bm CAUI-4 chip to module electrical standard ITU-T G.959.1-2012-02 standard· Single +3.3V power supply operating Built-in digital diagnostic functions Temperature range 0°C to 70°C RoHS Compliant Part Support FEC(Forward Error Correction)

联系我们